Break up surface tension and dissipate grease & oil contaminants to allow for complete surface cleaning and ease of grinding.
THE GREEN SOLUTION TO AN EASY FIRST GRIND FOR POLISHED CONCRETE FLOOR APPLICATIONS
ECOGUARD Pre-Grind is a water based concentrate, non-hazardous biodegradable cleaner and etching compound formulated for preparing concrete surfaces for easier grinding using higher grit metal diamonds on the first cut to obtain a quick and clean exposed Salt n’ Pepper surface, or a clean Cream polish finish using low grit resin diamond abrasives. Pre-Grind is formulated using organic acids and surfactants made from naturally occurring materials, which makes it safer to use and just as effective as traditional hydrochloric or phosphoric based solutions.
- Organic etching & cleaning compound.
- Breaks up surface tension for an easier first cut.
- Easily applied by pump-up sprayer.
- Economical to apply.
- Breaks down oil and grease stains.
- Does not need neutralization
- .Reduces diamond wear.
- Saves on labor costs on hard concrete surfaces.
- Environmentally safe.
- VOC compliant.
- User Friendly.
COVERAGE: ECOGUARD Pre-Grind can be diluted up to 1:3 with clean, potable water, depending on the surface condition. Use a more concentrated solution for heavily contaminated surfaces or to speed etching process. Coverage is approximately 200 square feet per gallon after dilution and is dependent on concrete porosity. Coverage is typical be for hard or mechanically troweled finished concrete.
AVAILABLE IN: 5 Gallon (18.9 L) pails, 55 gallon (208 L) drums, and 265 gallon tote (1000L)